Tilta Hydra Alien Pro with Electronic Suction Cup Kit (V-Mount) HDA-T18-A-V Overview
Hydra Alien Pro Car Mount

Electronic Suction Cups
ELECTRONIC SUCTION CUP SAFETY NOTICE
The Electronic Suction Cup, like other suction cups, has the potential to leave marks on various surfaces. It is recommended to take precautions such as using protective film or other materials to protect the surface being used. Using these suction cups in direct sunlight or in hotter environments can increase the chance of leaving a mark. It is not recommended to use these suction cups with wrapped vehicles.It is recommended to use this suction cup on a flat surface with the weight of the arm balanced over the center of the suction cup. Extending the arm past the suction cup or side mounting the suction cup can increase the risk of failure. In these situations we recommend taking additional precautions such as further securing the system with Ratchet Straps or Safety Chains.
Regardless of additional safety measures, we always recommend pushing down the suction cup when first attaching it to any surface. The suction cup should be as flat against the surface as possible and should look noticeably flatter than when not attached. Attaching the suction cup without applying physical force to it can greatly increase the chance of accidental disconnection.
Camera Mounting

The updated Pro arm is designed to mount and unmount a small or midsize gimbal, such as a DJI RS4 Pro or Ronin 4D, using Manfrotto dovetail plates, and there are multiple safety pins and knobs to keep your gear secure. Multiple 1/4″-20 and 3/8″-16 threads provide additional mounting points.NOTE: The suction cups do not support large loads such as the DJI Ronin 2 at its maximum load.
Load Capacity
The arm supports loads using different tension settings and a number of counterweights:
- Up to 28.7 lb with the heavy setting, with rigs such as DJI RS4 Pro or Ronin 4D with a cinema camera
- Up to 22 lb with medium setting, with rigs such as midsize gimbals like the MoVI Pro or DJI Ronin M with a compact cine camera
- Up to 15.4 lb with the light setting, with rigs such as the DJI RS series gimbals with a mirrorless camera or the Ronin 4D
Power and Control

Shock-Absorbing Head

Touchscreen OLED Display
Compatible Gimbals
The shock-absorbing head can pair with the following gimbals:
- DJI RS 4 Pro
- DJI Ronin 4D
- DJI Ronin-M
- MoVI Pro
Arm Hardware







































































![Beston EN-EL25C Battery for Nikon Cameras [USB C/Rechargeable]](https://raystoreeg.com/wp-content/uploads/2026/09/General-Pro-Egypt-Beston-EN-EL25C-Battery-for-Nikon-Camera-–-Rechargeable-Lithium-Ion-Battery-with-USB-C-Charging-Port-2.webp)
![Beston EN-EL25C Battery for Nikon Cameras [USB C/Rechargeable]](https://raystoreeg.com/wp-content/uploads/2026/09/General-Pro-Egypt-Beston-EN-EL25C-Battery-for-Nikon-Camera-–-Rechargeable-Lithium-Ion-Battery-with-USB-C-Charging-Port-4.webp)















